Features:

  • 1200 W short arc discharge lamp
  • CMY color mixing system
  • Combined 7 position color/gobo wheel plus open
  • Variable CTC
  • Motorized zoom and focus
  • Mechanical dimming
  • Optional beam expander
  • 2 x 5 indexable rotating gobos plus open
  • Variable frost, 3-facet prism
  • Motorized iris
  • Strobe effect 2 - 10 Hz, pulse effects, instant open and blackout
  • Pan and tilt range of 540°/267°
  • Variable fan control for quieter operation
  • Modular design for easy maintenance and servicing




Standard Gobos:


Physical
Length: 408 mm (16.1 in.)
Width: 490 mm (19.3 in.)
Height: 743 mm (29.3 in.), head straight up
Weight: 38 kg (83.8 lbs.), electronic ballast model
Weight: 45 kg (99.2 lbs.)

Lamp
Type: 1200 W short-arc discharge
Fitted as standard: Philips MSR 1200 SA/DE Gold
Color temperature: 6000 K
CRI (Color rendering index): >85
Average lifetime: 750 hours
Hot restrike: Yes on electronic ballast models
Socket: Double-ended SFc 10-4 with key
Ballast: Electronic (on E models) or magnetic
Approved alternative lamp(s): Osram HTI 1200 D7/60 SharXS

Dynamic Effects
Color mixing: CMY, independently variable 0 - 100%
Color temperature control: 0 - 178 mireds, continuously variable
Color/gobo wheel: 4 interchangeable filters (incl. UV transmitter), 3 interchangeable glass gobos + open, full and split colors, continuous rotation
Rotating gobos: 2 wheels, each with 5 interchangeable gobos + open, indexing, continuous gobo rotation, shake
Beam effects: Effect wheel with variable frost, rotating beamshaper and rotating 3-facet prism
Mechanical dimmer: 0 - 100%
Shutter: Strobe effect 2 - 10 Hz, pulse effects, instant open and blackout
Iris: 15 - 100% diameter, pulse effects
Focus: 2 m (6.6 ft.) to infinity
Zoom: Motorized
Pan: 540°
Tilt: 267°

Optics
Beam angle: Standard lens 12° - 29°, wide-angle lens 14° - 35°, cut-off angles, electronic ballast model

Control and Programming
DMX channels: 20/24
Setting and addressing: Control panel with LED display
16-bit control: Rotating gobos, pan & tilt
Movement control options: Tracking and vector
Protocol: USITT DMX512/1990
Receiver: Opto-isolated RS-485
Firmware update: Serial upload via DMX link

Construction
Color(s): Black
Housing: UV-resistant fiber-reinforced composite
Reflector: Glass, cold light
Protection rating: IP20

Gobos
Outside diameter: 37.5 mm (1.5 in.) +0/- 0.3 mm (0.01 in.)
Maximum image diameter: 30 mm (1.2 in.)
Maximum thickness: 7 mm (0.3 in.) (glass), 0.5 mm (0.02 in.) aluminum
Recommended glass: High-temperature Borofloat or better with dichroic or enhanced aluminum coating

Installation
Mounting points: 4 pairs of 1/4-turn locks, 45° orientation possible
Orientation: Any

Connections
AC power input: 3 m (9.8 ft.) integral cable without power plug
DMX data in/out: 3-pin and 5-pin locking XLR

Electrical
AC power: 100-120/208-240 V nominal, 50/60 Hz (electronic ballast)
AC power: 200-240 V nominal, 50/60 Hz (magnetic ballast)
Power supply unit: Auto-ranging electronic switch-mode (electronic ballast models)
Main fuse: 15 AT (x 2, for use with 208-240 V power)
Main fuse: 20 AT (x 2, for use with 100-120 V power)

Thermal
Cooling: Filtered forced air (temperature-regulated)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Maximum surface temperature, steady state, Ta=40° C: 140° C (284° F)
Total heat dissipation (calculated, +/- 10% at 110 V, 60 Hz / 230 V, 50 Hz): 5290 / 5050 BTU/hr.