The Strobe Runner eliminates having to program patterns on a DMX console. Instead, pre-programmed Patterns and Effects are called up simply from front panel push-buttons. Yet in installations where strobe effects need to be activated from a DMX system, it can be controlled from a single DMX channel via the DMX input. This allows the Strobe Runner to be operated stand alone or part of a total DMX system. You can also change Programs and Effects from DMX. This, however, requires two additional DMX channels.
Other features include audio chase activation with sensitivity control, speed and intensity control, LCD display, ability to activate one sequence or continue to repeat sequences, and the ability to activate programs from an external contact closure.
Programs and Effects:
There are 7 modes of operation that can be selected by the Program push button, they are: chase, reverse, all on,
alternate, merge, whirl, explode.In any of the above programs there are 7 different ways the strobes can flash. These are selected by the Effects
push button: burst, flash, hyper, crossfade, fade down, lightning, and continuous.Dramatic pre-programmed lightning effects can be achieved by combining the alternate program with the
lightning effect!Programs can be activated by pressing the Bump push button or closing an external contact on the Bump jack.
To control the Strobe Runner from an external DMX source, simply connect the source to the DMX Input connec-
tor at the rear of the console. The DMX Thru connector allows for daisy chaining. The first DMX channel is used
to activate the bump, the second activates the program and the third activates the desired effect.The Strobe Runner features EEPROM memory, and will remember the last operating state when powered down.
So when powered back up, you won't have to reset the programs or effects, it will automatically return to its last
operating state.Specifications:
Electrical: Power Supply = Operates on 12 Volts AC from 120 V wall mount transformer supplied with unit. (240 V wall mount is available).
Mechanical:Height = 3” Width 8” Depth = 7” Weight = 3 lbs.
Display = LCD.
Chase Speed Range = 30 flashes/sec. to 30 flashes/mm.
Audio Input Range = 100 millivolt to 10 Volt RMS, Input impedance=2K ohm.
External Bump Jack = Contact closure @ 1 ma, open circuit coltage = 5 Vdc.
Output = DMX 252 frame packet, refreshed 35 times per second.
DMX Input channels = 512 set by binary DIP switch (9 position).
DMX Thru passive.| Who we are | Offices | How to Reach Us | Line Card | Guest Book | The Grip Stop | Rentals |
| Products | In Spanish | Used Stuff | Shipment Tracking | Industry News & Links | Just for Fun || Back to Home Page |
